Metal Detector COMBI-TU

For transformer- and paperboards, ultrahigh sensitivity

Description

Datasheet: SHARK® COMBI-TU

The METAL SHARK® COMBI-TU is a metal detection system based on the latest technologies. It is used for inspection of:

  • transformer boards
  • paper boards
  • textiles

The metal detector is constructed as a multi-segment sensor, with sensor plates underneath and above boards to be inspected. The total detection zone of the detector is thus divided into several single zones, each of them about 365 mm wide. The sensor is available for various paperboard widths, such as 1,000 – 5,000 mm. The net aperture height is 28 mm. The paperboards shall move through without touching the sensors. Maximum transformer board thickness is recommended to be 8 mm, with a maximum board bending of 20 mm between the lowest and highest.

Available digital controllers: METAL SHARK® 2A

Features & Benefits of Metal Detector COMBI-TU

Metal Detection Levels: Ferrous sphere 0,6 mm Magnetic stainless steel sphere 0,7 mm Non Ferrous sphere 0,8 mm Non magnetic stainless steel sphere 1,0 mm

Available detection widths: 1.000 – 5.000 mm (3.3 – 16.6 ft)

Category Filter